Factors Affecting the Measurement of Online Residual Chlorine Meter

The film-covered electrode of the online residual chlorine analyzer uses gold as the cathode and silver/silver chloride as the anode. The electrode is filled with an electrolyte with ideal pH value and stable conductivity, which is separated from the measured liquid by a layer of selective permeable membrane (PTFE). During the measurement, the instrument applies a stable voltage to both ends of the electrodes, the residual chlorine (hypochlorous acid and hypohydrogen ion) in the measured solution diffuses through the residual hydrogen film, the cathode accepts electrons, and the anode releases electrons to generate current. This current is directly proportional to the rate at which residual chlorine diffuses to the cathode, that is, ultimately proportional to the concentration of residual chlorine in the solution to be measured. Residual chlorine means that after the water has been chlorinated and disinfected, after a certain period of contact, it will consume part of the chlorine in addition to the action of bacteria, microorganisms, organic matter, and inorganic matter in the water. The remaining part of the chlorine is called residual chlorine. Several factors that affect the measurement of the online residual chlorine analyzer: 1. The pH value of the sample water The pH value of the sample water has a great influence on the measurement of residual chlorine, especially when the pH value is <5 or >10. 2. The temperature of the sample water The temperature of the sample water has a certain influence on the measurement of residual chlorine. It is generally believed that the measured value will increase by about 5 for every 1°C increase in temperature. The ideal water sample temperature should be between 15-20°C. 3. In the actual application of the ammonia chlorine concentration of the sample water, it is sometimes found that the amount of chlorine added increases, but the residual chlorine of the sample water decreases, and when it increases again, the residual chlorine increases again. This is what we often call breakpoint chlorine addition. Usually this is caused by the high concentration of ammonia nitrogen in the water, and the chemical reaction between chlorine gas and ammonia nitrogen in the water to produce chlorine ammonia. 4. Pressure and flow rate If the pressure is too high and the flow rate is too fast, the electrode will not respond in time and the measured value will be reduced. If the pressure is too small and the flow rate is too slow, the hypochlorous acid in the sample water will not be replenished in time and the sensitivity will be reduced.

Shanghai Boqu Instrument Co., Ltd. specializes in undertaking corporate offers to cater the needs of different companies.

If you are thinking of having a , then you must be first clear about the purpose, which is driving you to buy this device. Shanghai Boqu Instrument Co., Ltd. offer quality for your needs with complete assurance of ability to serve your purpose.

Shanghai Boqu Instrument Co., Ltd. has enlarged the scope of services, which can fully please customers' demands.

A wholesaler should have many water quality monitoring device based products that could help you if you have a water quality monitoring device problem. It is better to treat the problem early rather than have to deal with it later. Shanghai Boqu Instrument Co., Ltd. is your best choice.

Offering a loyalty program not only makes customers feel valued, but it allows Shanghai Boqu Instrument Co., Ltd. to easily collect important information about customers.