Industrial pH/ORP Meter PHG-2081X
PHG-2081X INDUSTRIAL PH/ORP METER
Attention
Please read the following instructions for safe operation before use.
1.Please observe whether the appearance of the instrument is damaged by the squeeze of the transportation before use.
2.Read the operating manual before use to avoid incorrect wiring .
3.After all wiring is completed, it must be checked carefully before sending power and confirming that the connected equipment is correct.
4.Please avoid the high temperature, high humidity and corrosive environment, and avoid direct sunlight.
5.Avoid using power supplies that cause surge interference. If there is surge interference, please separate the power supply of the instrument from other power sources.
Product&Accessory
Instrument includes: one instruments,one user manual,four sets of support(thread,fixed bar,fixed block)
TECHNICAL PARAMETERS
Function | pH | ORP |
Range | -2.00 ~+16.00 pH | -2000mV~+2000mV |
Resolution | 0.01pH | 1mV |
Accuracy | ±0.01pH | ±1mV |
Temp. Comp. Element | Pt 1000/NTC10K | |
Temp. Measure range | -10.0 ~ +130.0℃ | |
Temp. Comp. Range | -10.0 ~ +130.0℃ | |
Temp. Res0lution | 0.1℃ | |
Temp. Accuracy | ±0.2℃ | |
Working Temp. | 0 ~ +70℃ | |
Storage Temp. | -20 ~ +70℃ | |
Input Impedence | >1012Ω | |
Display | Ultra-large dot matrix LCD with backlight | |
PH/ORP Output 1 | Isolated 4~20mA,max load 500Ω | |
Temp Output 2 | Isolated 4~20mA,max load 500Ω | |
Current Output Accuracy | ±0.05 mA | |
RS485 | Standard Mod bus RTU | |
Communication Rate | 9600/19200/38400 | |
Relay Contact | 5A/250VAC,5A/30VDC | |
Clean set | ON: 1~1000 seconds, OFF: 0.1~1000.0 hours | |
One Multifunctional Relay | Clean/Period alarm/Fault alarm | |
Relay Delay Action | 0-120 seconds | |
Data record | 500,000 times | |
Language | English/繁体中文/简体中文 | |
Protection | IP65 | |
Power | 90~260VAC, consumption <7watt | |
Installation | Panel/Wall/Pipe mounted | |
INTRODUCTION
Contact Us
Office Add：No. 118 Xiuyan Road,Pudong New Area,Shanghai,Zip Code:201315,China
Contact us right away
BOQU Instrument focus on development and production of water quality analyzers and sensors, including water quality meter, dissolved oxygen meter, pH sensors, etc.
